American car craft – American Car Craft HHR Taillight Trim Polished 4Pc 2006-2012 User Manual
Page 2
2. Your new rings come to you in a package marked driver and passenger. Remove
the rings from either side and you will notice that the rings are not quite a perfect
circle. These are made this way so that they will match the irregular shape of the
lens. The top lenses are slightly different then the bottom ones so you will simply
need to place the ring over the lens and rotate it until the shapes match. Once you
have matched the ring mark the lenses and the rings with a grease pencil or china
marker so that you will be able to reestablish the positions of each ring when you
are ready to permanently attach the ring to the paint.
3. Now that you have established the correct position of each ring simply peel the
red release liner from the back of each ring and carefully place them onto the
paint and press firmly to set in place. DO NOT GET WET FOR 24 HOURS.
Note: EXTRA CARE must be taken when cleaning your stainless kit. It is a good
idea to lightly dust your kit with a clean soft cloth first in order to prevent any
particles from scratching it. Then wipe (using a new clean soft cloth) with a good
quality streak free glass cleaner.
If any questions occur during installation please contact American Car Craft @
727-861-1500
Thank you and enjoy your purchase!
AMERICAN CAR CRAFT
18924 SAKERA ROAD-HUDSON FLORIDA 34667
Phone # 727-861-1500 Fax # 727-861-1520