American Car Craft Challenger SRT 8 Firewall Brushed w_cap 6.1L 2008-2011 User Manual
Page 3
are two ground bolts on the left and right side of the engine bay just
hidden behind the shock tower ridge. For best placement of your
new firewall you may want to rest the panel in front of these bolts!
5. For SRT 8 Models Only: Thoroughly clean the top of the factory
transmission fluid dip stick cap with household rubbing alcohol then
swipe the factory cap once with the adhesive promoter provided. You
have been provided with a chrome cap cover remove the Velcro
attachment cookie and install it onto the factory cap and press firmly
to set. Then simply place your new cap cover in position.
CARE AND MAINTENANCE
Note: Care must be taken when cleaning your cover. It is a good idea to
lightly dust your cover with a clean soft cloth first in order to prevent any
particles from scratching it. Then wipe (using a new clean soft cloth) with a
good quality streak free glass cleaner.
If any questions occur during installation please call American Car Craft at
727-861-1500.
Thank you and enjoy your purchase!
AMERICAN CAR CRAFT
18924 SAKERA RD HUDSON FL 34667
Phone: 727 861-1500 Fax: 727 861-1520