You have only one shot at this so go slowly – American Car Craft Corvette Doorsills Brushed Outer - Plain No Ribs 2Pc 2005-2013 C6 User Manual
Page 2
3. THIS STEP IS VERY IMPORTANT!!! Gently pre-bend the sills to fit. The metal is flexible enough
to allow you to gently curve it so that the sills fit and conform to the door area without forcing it to
lay flat. You want the doorsills to look like they are attached (to conform to the shape of the car
without any of the doorsill sticking up from the car) to the car before you actually remove the red
liner.
4. When you are satisfied with the fit, remove the red liner from the attachment tape and firmly press.
IT IS VERY IMPORTANT THAT YOU SLOWLY INSERT THE SILLS INTO PLACE,
KEEPING THE LARGE FLAP AWAY FROM THE CAR. THE ATTACHMENT TAPE IS
VERY RELIABLE AND IT MIGHT BE A GOOD IDEA TO MAKE A COUPLE OF TEST FITS
BEFORE PULLING THE RED LINER!
YOU HAVE ONLY ONE SHOT AT THIS SO GO SLOWLY!
5. Once in place pull the protective liner off the sills.
6. OPTIONAL STEP: You have been provided with two lengths of 1/8” chrome molding. This has
been supplied should you elect to use the trim to close the small space between the tongue of the
sill and the painted surface of the car. To apply swipe a thin bead of the remaining adhesive
promoter directly to the paint surrounding the tongue of the stainless sill. Begin by peeling back a
small portion of the red release liner as you place the trim onto the paint directly against the new
stainless sill, work your way along the edge as you pull the liner pressing the molding firmly to set
the trim into position. As you approach the end simply cut the excess molding with a scissor or
snap knife and press the end firmly to set.
If you have any questions during installation please call American Car Craft at 727 861-1500. Thank
you and enjoy your new purchase.
Note: Care must be taken when cleaning your sills. It is a good idea to lightly dust your sills with a clean
soft cloth first in order to prevent any particles from scratching them. Then wipe (using a new clean soft
cloth or bounty paper towel) with a good quality streak free glass cleaner.
American Car Craft LLC
18924 Sakera Rd Hudson, FL. 34667
Ph 727.861.1500 Fax 727.861.1520