American Car Craft Corvette Brake Booster Cover Polished 2009-2013 C6 all User Manual

Page 2

Advertising
background image



2. Remove the vacuum line and the two nuts securing the master cylinder. Pull the

master forward off the two bolt studs.


3. Slide the new booster cover over the master cylinder booster.


4. Reposition the master onto the bolt studs remove the protective liner and tighten

down the master and cover.


5. You have been provided with two decorative chrome nut covers. Apply a small

dab of 100% clear household silicone to the covers and install them over the two
factory bolts to finish the installation.


6. Replace and secure the factory water tank.


If any questions occur during installation, please contact American Car Craft at

727-861-1500.

Thank you and enjoy your new cover.

AMERICAN CAR CRAFT

18924 SAKERA RD HUDSON FL 34667

Phone: 727 861-1500 Fax: 727 861-1520

www.americancarcraft.com

Advertising