American Car Craft Corvette Power Steering Reservoir Cover w_cap 2008-2013 C6+Z06+GS User Manual

Page 2

Advertising
background image

3. Now that you have successfully repositioned the supply line simply remove the factory fluid cap and place the

new cover in position. Reinstall the factory cap to lock the new cover in place.

4. Scrub the top of the factory cap with alcohol to remove any dirt or grime. Then swipe to cap top with the

adhesive promoter provided. Once this is done remove the Velcro cookie half from under the decorative cap
cover provided and then remove the release liner from the half and press it onto the factory cap.

5. Finally remove the protective liner from the new cover and then place the decorative cover over the factory

fluid cap to finish the installation.

If any questions or problems occur during installation, please contact American Car Craft at 727-861-1500.

Thank You and Enjoy Your Purchase!


AMERICAN CAR CRAFT

18924 SAKERA RD HUDSON FL 34667

Phone: 727 861-1500 Fax: 727 861-1520

www.americancarcraft.com

Advertising