American Car Craft Mustang Engine Shroud Covers Illuminated 5.0 GT 9Pc Polished_Brushed 2011-2014 - Manual

AMERICAN CAR CRAFT INSTRUCTIONS
2011-2014 MUSTANG 9pc ENGINE SHROUD ILLUMINATED GT 5.0
PART # 273028
Parts Included:
1-Large Abrasive Pad
4-Adhesive Promoter Packs
9pc Stainless Shroud Cover
Introduction: This new all stainless kit is a very comprehensive set of pee land stick sections designed to take
what is already a very nice looking engine shroud and send it over the top adding a special custom look to the
factory cover. With all its sections in place you will agree that the cover will look sleek and expensive. With
the lighting option your engine will gleam with power and beauty.
Liner Information: Your new accessories will come to you with a protective surface liner. Leave this liner in
place until the installation is complete to prevent finger prints and or possible scratches during installation.
1. All the sections that come in your kit have been designed as a peel and stick application. In order to
insure that all the section will stick permanently in place are dependent on two very important aspects.
The first is the surface preparation. This part of the installation is something you just do not want to do
in a hurry if you want to expect all the sections to bond properly. If you take into consideration engine
heat, weather, vibration and the expansion and contraction of the shroud and the parts themselves the
surface prep is paramount. Over many years we have learned just how to prepare this surface’s