PowerWalker SNMP DP-522 User Manual
Page 22
p Firmware Upgrade
NetAgent offer convenient firmware upgrade function. When you are going to upgrade
firmware, click Download Firmware from NetAgent Setup menu, click “Browser” select
new firmware file (*.bin) and press “Start”. Thus, Net Agent’s Red LED and Yellow
LED flashing alternative means the firmware is upgrading. After upgrade completed,
Net Agent will auto reboot.
To upgrade multi NetAgent with same firmware, hold on
“shift” or Ctrl” and choose the NetAgent device from Netility list.
(Please connect to the
http://www.megatec.com.tw
for the latest firmware) If
multi upgrade, select When upgrade firmware to multi NetAgent,
Note:Net Agent provided well-considerable protection function. If uploading was
interrupted and raised data in incomplete, Net Agent will keep its default to avoid of
complete data loss. In the case, just repeat “firmware upload” as well.
Fig.10 Netility : Update NetAgent UPS firmware
q About - Netility version examined
Fig.11 Netility version examined
r
Refresh List - Search Lan’s Netagent UPS manually
Netility would search all the available NetAgent from Lan automatically, or the
user could search manually by click on “Search NetAgent”.
16