PowerWalker SNMP DP-522 - Manual (Page 37)

2.2.3 Network
This page is to set NetAgent Network settings.
IP Address
IP Address
This section is to set NetAgent IP address.
Subnet Mask
This section is to set NetAgent Subnet Mask.
Gateway
This section is to set NetAgent Gateway.
Obtain an IP address
This section is to choose to set NetAgent IP address manually or via DHCP.
The above 4 sections can be set in Netility as well. NetAgent will reboot after any of the
above are changed.
DNS Server IP
Primary DNS Server IP
This section is to set NetAgent primary DNS Server IP address.
Secondary DNS Server IP
This section is to set NetAgent secondary DNS Server IP address. NetAgent will use
the secondary DNS Server IP address when the Primary DNS Server IP address is not
working.
Ethernet
Connection Type
This section is to set communication speed between NetAgent and Network.
NetAgent will reboot after Connection Type is changed.
Stop UPS communication when Ethernet disconnected
This section is to set if to stop UPS communication when NetAgent disconnects with
Ethernet
Dynamic DNS
This is a free service that allows the user to alias a dynamic IP address to a static
hostname
Sevices Provider
NetAgent can be configured to register with any of the Dynamic DNS providers.
In general, to register a Domain Name;
a. Go to the DDNS provider website listed .
b. Register a new user account and password with the DDNS provider.
c. Choose a Domain Name to point to your current Dynamic IP
d. Enter information obtained in (b) and (c) into NetAgent DDNS fields
31