PowerWalker SNMP DP-522 - Manual (Page 28)

2.1.3 Current Status
This page is to show the UPS current status. Users can choose an interval from the
drop-down box to refresh the status readings.
UPS Status
This section is to show the UPS power status. The abnormal status will be displayed in
red when there is a power event.
Input Status
This section is to show the UPS input status, including AC Status/Input Voltage/Input
Frequency. Values here will be shown in red when an abnormal status condition occurs.
Output Status
This section is to show the UPS output status, including Output Voltage/Output
Status/UPS Loading. Values here will be shown in red when an abnormal status condition
occurs.
Battery Status
This section is to show the UPS Battery Status, including Temperature/Battery
Status/Battery Capacity/Battery Voltage/Time on Battery..etc. Values here will be shown
in red when an abnormal status condition occurs.
Fig.18 Current Status
2.1.4 Remote Control
This page is to provide remote UPS test functions. Choose the test item, then click
on 'Apply' to execute it. (Please refer to the UPS manual for individual UPS Test
functions.)
If you are using a Contact Closure UPS, you will only be able to use the function '
Turn off UPS when AC Failed'.
22