PowerWalker SNMP DP-522 - Manual (Page 54)

2.3.3 Data Log
This page is a UPS data log. It records UPS Input Voltage/Output Voltage/
Frequency/ Loading/Capacity/ Temperature. When reach to the limit, it rewrites on
the previous logs. Logs can be saved in CSV format by clicking on “Save Data
Log”.
Date/Time
This is a record of the Date (yyyy/mm/dd) and Time (hh:mm:ss) that the data was
recorded. The interval between every log can be set in /Configuration/ UPS configuration/
UPS recorded/UPS data Log/.
Input Volt.
This section shows records of the UPS Input voltage readings. (Unit: Volt.)
Output Volt.
This section shows records of the UPS Output voltage readings. (Unit: Volt.)
Freq. (Hz)
This section shows records of the UPS Input Frequency. (Unit: Hertz)
Load
This section shows records of the UPS Output loading. (shown as %)
Capacity
This section shows records of the UPS battery capacity. (shown as %)
Temp.
This section shows records of the UPS internal temperature. (unit: degrees Centigrade)
Env. Temp.
This section shows environmental temperature which detected by NetFeeler II
Env. Humidity
This section shows environmental humidity which detected by NetFeeler II
48