Peerless-AV FPE42F-S - Installation - Manual (Page 5)

5 of 16 ISSUED: 07-16-10 SHEET #: 061-9050-7 08-07-12
optional Removal of Bay Door
1
Bay door may be removed for ease of installation
to mounting surface. NotE: Removal of bay door
is optional. Installation may be completed without
removing bay door.
Insert flathead screwdriver under brass clip of gas
spring shown in detail 1 and pry up. Pull gas spring
away from bay door.
DEtAIL 1
10-24 x .5"
PHILLIPS SCREWS
A
fig. 1.1
• Grasp bay door firmly. Bay door will swing freely when gas springs are removed.
WARNING
Remove center set of 10-24 x .5" phillips screws
from inside of enclosure assembly ( A) as shown in
figure 1.1. Slide bay door to the right to disengage
hinges and lift off of enclosure assembly.
1-1
GAS SPRING
BRASS CLIP
BRASS CLIP
BAy DooR
MAIN
ENCLoSURE
ASSEMBLy