Xoro HTL 400T - Manual (Page 33)

HTL 400 T 11
English
Battery
1. To charge the battery, please connect the AC/DC power adapter cable to the DC
In port of the device on the left side. After than, please connect the AC/DC power
adapter to the wall outlet. During charging the battery the indicator LED is lighted
red. If the battery is fully charged, than the LED light switches off.
2. For charging the battery please switch off the device. This shorten the charging
time and does not depreciates the life time of the battery.
3. Please charge at the first time the battery completely.
4. The charging time is about 3 hour. During charging the battery the indicator LED
is lighted red. If the battery is fully charged, than the LED light switches off.
5. A fully charged battery supports a operating time of 4 hours by DVB-T or video
playback. The operating time by only listening music is around 5 hours. Power
consumption depends on the operations of the player such as brightness of the
screen, volume level, etc.
6. Please charge the battery only than when the battery is discharge and empty.
7. Storage Temperature and Humidity (Short-term) In a dry location with low
humidity (Max.85%), no corrosive gases, at a temperature range of 0°C to 45°C.
8. Do not put the battery into fire, do not heat the battery and do not contact the
battery with water.
9. Please do not open the device to get access the battery.
Note:
Do not charge the device and battery in the car by the cigarette lighter.
1. Connect the headphones with a 3.5 mm stereo plug can be connected.
2. Adjust the volume by turning the dial.
3. Avoid listening to sound at levels which may be harmful to your ears.
Note:
Do not use the earphone continously over a prolonged period.
Connecting Headphone