Maintenance – KIA Amanti 2004 User Manual

Page 253

Advertising
background image

Maintenance

16

7

1
2
3
4
5
6
7
8
9

Check the condition and connections
of all cooling system hoses and
heater hoses. Replace any swollen
or deteriorated hoses.
The coolant level should be filled
between F and L marks on the level
gauge attached to the coolant reser-
voir cap when the engine is cool.
If the coolant level is low, add enough
specified coolant to provide protec-
tion against freezing and corrosion.
Bring the level to F, but do not over-
fill. If frequent additions are required,
see an Authorized Kia Dealer for a
cooling system inspection.

Changing coolant

Change coolant according to the
Maintenance Schedule.
• Use only soft (de-mineralized)

water in the coolant mixture.

• The engine in your vehicle has alu-

minum engine parts and must be
protected by an ethylene-glycol-
based coolant to prevent corrosion
and freezing.

• DO NOT USE alcohol or methanol

coolant or mix them with the spec-
ified coolant.

• Do not use a solution that contains

more than 60% antifreeze or less
than 35% antifreeze, which would
reduce the effectiveness of the
solution.

For mixture percentage, refer to the
following table.

2GHA5003

-15°C (5°F)

35

65

-25°C (-13°F)

40

60

-35°C (-31°F)

50

50

-45°C (-49°F)

60

40

Ambient

Temperature

Mixture Percentage (volume)

Coolant

Solution

Water

Opirus CAN 7-1.qxd 7/8/03 2:25 PM Page 16

Advertising