KIA Amanti 2004 - Manual (Page 267)

Maintenance
30 7
1
2
3
4
5
6
7
8
9
1. Raise the wiper arm and turn the
wiper blade assembly to expose
the plastic locking clip.
Compress the clip and slide the
blade assembly downward; then
lift it off the arm.
✽ ✽ NOTICE
Do not allow the wiper arm to fall
against the windshield.
2. Firmly grasp the end of the rubber
blade and pull until the tabs are
free of the metal support.
3. Remove the metal retainers from
the rubber blade and install them
in the new rubber blade.
✽ ✽ NOTICE
Do not bend the metal retainers.
MMSA7014 MMSA7015 MMSA7016
Plastic locking clip Push
Tabs
Metal support
Pull out
Retainer
Retainer
Opirus CAN 7-1.qxd 7/8/03 2:25 PM Page 30