KIA Amanti 2004 - Manual (Page 45)

Knowing your vehicle
34 3
1
2
3
4
5
6
7
8
9
A driver position memory system is
provided to store and recall the seat
and outside mirror positions with a
simple button operation. By saving
the desired positions into the system
memory, different drivers can reposi-
tion the seat and outside mirror
based upon their driving preference.
If battery is disconnected, the posi-
tion memory will be lost and the driv-
ing positions should be restored in
the system. Storing positions into memory
using the buttons on the door
Storing driver’s seat positions
1. Shift the transaxle lever into P
while the ignition switch is ON.
2. Adjust the seat and outside
rearview mirror to positions com-
fortable for the driver.
3. Press M button on the control
panel.
4. Press one of the memory buttons
(1 or 2) within 5 seconds after
pressing the M button. The sys-
tem will beep twice when memory
has been successfully stored.
The particular driver positions are
memorized in the button (1 or 2)
selected.
DRIVER POSITION MEMORY SYSTEM (IF EQUIPPED)
1GHA2201
Opirus-ENG (CAN) 3.qxd 7/8/03 1:56 PM Page 34