Airbagit Street Scraper - Manual (Page 3)

23. With all mounting hardware tightened cut out factory frame pieces inside of notch
directly over axle.
24. Install air fitting on airbag and mount air bag to FRAME SECTIONS and
LOWER TOP BAG BRACKET.
25. Remount wheels.
26. Using floor jack raise rear of truck and remove jack stands. Lower down truck.
27. Add and remove air to bags and articulate suspension.
28. Adjust pinion angle to factory specs at ride height with adjustable heim joints on
UPPER LINK BARS and LOWER LINK BARS.
29. Using bed mounts as reference points, measure and cutout bed floor to clear street
scraper and remount bed.
Check bed for weak points in bed and bed sides needing reinforcement due to bed being
cut. Reinforce these points as necessary.
General Street Scraper
Parts List
x 2 – Frame sections ( right and left)
x 1 - Front cross member
x 1 - Upper cross member
x 2 - Lower bag mounts
x 2 - Lower link bars
x 2 - Upper link bars
x 1 - Differential housing link mount
x 2 - Axle link bracket
x 2 - Triple 2600lb bag
x 2 - 2000 LL shocks
Hardware List
x 20 - ½”-13 x 11/4” Bolts
x 10 - ½”-13 x 1 ½” Bolts
x 30 - ½”-13 C-lock Nuts
x 60 - ½” Flat washers
x 4 - 9/16”-12 x 4” Bolts
x 3 - 9/16”-12 x 6 ½” Bolts
x 7 - 9/16”-12 C-lock Nuts
x 14 - 9/16” Flat Washers