Airbagit Tow Kit 2001-2010 GM HD Heavy Duty 4 Link User Manual
Page 5
15. Install the lower bag mounts on to the rear axle. The outboard side of the bracket
will sit flat on the axle’s bump stop pad. The inboard side of the bracket will be
supported by a clamp that fits around the axle and is bolted to the bag mount. Not
all axles are the same and some bump stop pads are taller than others. We include 3
different support brackets with different heights. Choose the one you need to keep
the bag mount parallel with the axle tube and the other two are used as clamps to
secure the bracket to the axle.
16. Install air fitting on airbag and mount the rear air bags. Be sure to place the 9 ½”
diameter flat bag plate between the bag and bag mounts. This keeps the bag from
rolling over itself at low pressures and contacting any sharp objects.