Approved Optics Approved HP J9144A - Manual (Page 2)

Page 2 of 8 Approved Optics www.ApprovedOptics.com
J9144A-A
X2-LRM 10GB Module
1310nm, 220m, MMF, SC RoHS6
Supply Voltage APS Vaps 0 1.5 V
Static Discharge Voltage, All Pins2) STd 500 V
Average Receive Optical Power RxP max 1.5 dBm
Exceeding any one of these values may permanently destroy the device.
Electrical Characteristics
Recommended Operating Conditions
Parameter Symbol
Values Unit
min. typ. max.
Operating Case Temperature TC 0 70 °C
Transponder Total Power Consumption P 4 W
Supply Voltage +5.0 V VCC5 4.75 5 5.25 V
Supply Current +5.0 V ICC5 10 mA
Supply Voltage +3.3 V VCC3 3.14 3.3 3.47 V
Supply Current +3.3 V ICC3 830 mA
Supply Voltage APS VCC aps 1.152 1.2 1.248 V
Supply Current APS ICC aps 830 850 mA
.
Electrical DC Characteristics
(VCC5= 4.75 V to 5.25 V, VCC3= 3.14 V to 3.47 V, VCCaps= 1.152 V to 1.248 V, TC= 0°C to 70°C)
Parameter Symbol
Values Unit
min. typ. max.
1.2 V CMOS (1.8 V CMOS Compatible1)) I/O DC Characteristics (PRTAD; LASI; RESET;
TX_ONOFF)
External Pull-up Resistor for Open
Drain
Rpullup 10 22 k?
Output High Voltage2) Voh 1 V
Output Low Voltage2) Vol 0.15 V
Input High Voltage Vih 0.84 1.5 V
Input Low Voltage Vil 0.36 V
Input Pull-down Current3) Ipd 20 120 µA
MDIO I/O DC Characteristics (MDIO; MDC)
Output Low Voltage5) VOL –0.3 0.2 V
Output Low Current IOL 20 mA
Input High Voltage VIH 0.84 1.5 V
Input Low Voltage VIL –0.3 0.36 V