Installation procedure, Recessed shampoo shelf – Swanstone BK-326072 - Installation User Manual

Page 22

Advertising
background image

2. Place two braces against each front and rear wall

and place two braces against the rear panel of the
seat area.

3.

Install (wedge) four horizontal braces (eight total)
against the side wall braces.

4.

Insert small blocks between the front to rear panel
braces and the back panel braces. These will apply
pressure to the back panel to hold it in place.

5.

Remove the braces after 24 hours.

Recessed Shampoo Shelf

Install the recessed shampoo shelf after the braces are
removed.

Select a desirable location for mounting the recessed
shampoo shelf. A stud finder may be used to assist in
locating an area which will place the unit between studs.
The depth of recessed shampoo shelf (3-1/4”) will not
permit any obstruction in the wall (light fixture, electrical
wiring, plumbing, etc.).

Marking the exact location for the recessed shampoo
shelf is a critical step. If the location is marked wrong and
the back panel is cut, the panel cannot be patched or
repaired.

IMPORTANT NOTICE

IMPORTANT NOTICE

BK-TB-004

BK-TB-003

BK-TB-002

The Swan Corporation – Swanstone

22

800-325-7008

Installation Procedure

Advertising