Neutrik NPPA-TT-S PATCH PANEL “Easy Patch” - Manual (Page 13)

Page 13 of 13
NPPA-TT-S Instruction Manual
10. Ordering Information
Patch Panels
Part Number
Description Configuration* Wiring Grounding
NPPA-TT-S 2 x 48 jacks half normalled bottom 288 solder terminals individual
NPPA-TT-S-FN 2 x 48 jacks full normalled 288 solder terminals individual
NPPA-TT-S-HNT 2 x 48 jacks half normalled top row 288 solder terminals individual
NPPA-TT-S-I 2 x 48 jacks isolated 288 solder terminals individual
NPPA-TT-S-P 2 x 48 jacks parallel 288 solder terminals individual
* fully loaded jack pairs only
Pre-configured Jack-Pairs
Part Number
Description Configuration*
NJ3TTA-4-HNB blocks of 2 channels half normalled bottom row cover ident color: clear
NJ3TTA-4-HNT blocks of 2 channels half normalled top row cover ident color: yellow
NJ3TTA-4-FN blocks of 2 channels full normalled cover ident color: green
NJ3TTA-4-P blocks of 2 channels parallel cover ident color: red
NJ3TTA-4-I blocks of 2 channels isolated cover ident color: orange
Accessories
NPPA-S
Strain Relief bar
NKTT* Patch cords with NP3TT-1 plugs. Available in black, blue, green, red and
yellow. Length: 30, 40, 60, 90, 120 cm
NPPA-NB Normalling bars for changing the normalling of all 48 channels
Standard supply
The compact Neutrik ”Easy Patch” NPPA-TT-S consists of:
• Black coated steel casing with aluminium fittings
• 2 x 48 highly integrated Neutrik
NJ3TTA jacks with gold plated double contacts and specially
designed normalling mechanism (standard: half normalled bottom row)
• Integrated internal pre-wiring with selectable flexible grounding system
• Solder lugs termination
• 2 Built–in cable retention bars
• Spare normalling configuration bars
4 Normal 1: “short”, bridges 5 contacts
8 Normal 2: “medium”, bridges 6 contacts
4 Normal 3: “long”, bridges 7 contacts
• 1 Disassembling plier
• 1 Instruction Manual