Neutrik NPPA-TT-S PATCH PANEL “Easy Patch” - Manual (Page 8)

Page 8 of 13
NPPA-TT-S Instruction Manual
Grounding Variations
NOTE: In standard configuration there is no ground connection between top and bottom row
unless it is provided by an inserted patch cable. If this is required, as in the case of
phantom powered microphone lines, either make an internal connection by individually
wiring the corresponding upper and lower ‘S’ terminals, or if the latter is critical with
respect to possible ground loops make the connection via patch cable instead of using
the normalling feature.
5. Wiring
For access to the terminals remove the top- and bottom-cover with three cross-recessed screws
(M2.5x8) each fixed in a triangle.
Rear front for wiring