Factory Direct Hardware Hansgrohe 10111 - Manual (Page 3)

3
Installation Instructions
• Sit the faucet with black sealing ring in the faucet hole on top of the
mounting surface.
• From beneath, install the friction washer, metal washer, and mounting
nut. Tighten the mounting nut, taking care not to overtighten.
• Check the position of the faucet. When satisfied, use a slot-headed
screwdriver to tighten the tensioning screws.
• Feed the pull rod through the hole in the back of the faucet body.
• Attach the supply lines to the supply stops with standard 3/8"
compression fittings (not included)