Factory Direct Hardware Hansgrohe 18020001 - Manual (Page 2)

2
Axor Massaud Single-Control Highriser Lavatory Faucet
18020XX1
Product Specification
Max. Flow Rate 2.2 gpm
Max. incoming water pressure 145 psi
Recommended water pressure 14.5 - 72 psi
Max. hot water temperature 176 o F*
Recommended hot water temp 120 o F - 140 o F*
Hole size in mounting surface 1 3/8”
Max. mounting surface thickness 1 5/8”
10 mm supply hoses -- 10 mm - 3/8” adapters included.
No drain or pull rod is included.
This faucet may be used with a continuous flow water heater
if the flow pressure is at least 20 psi.
*Know and follow all applicable local plumbing codes when setting the tem-
perature on the water heater. In Massachusetts, the water heater may be set no
higher than 112 o F.
Do not allow the supply hoses to bend
or twist!