Factory Direct Hardware Delta 81T221BTA - Manual

Electronic Exposed
TECK ® Flush Valves
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.
Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability. DSP-81T201BTA
❏ 81T201BTA
– Exposed Battery Operated
1-1/2'' Top Inlet Closet Fixture
• Polished chrome plated vandal resistant metal cover
with top mounted sensor operated H
2
O PTICS ™ electronics
• Right or left-hand supply installation
• ADA compliant, automatic operation battery powered infrared sensor
• Scratch resistant replaceable lens window
• Four (4) size AA alkaline batteries factory installed with valve in sleep mode for
easy installation
• Hinged battery housing for easy maintenance
• Low battery flashing light (5000 flushes remaining) with battery strength indicator
• Infrared sensor range adjustment of 610mm-1067mm (24" - 42"),
factory set at 34” (±2")
• Optional dual flush setting capability factory set to OFF (dual flush recommended for
6 litre (1.6 US gal) models only)
• Optional 24 hour automatic flush factory set to OFF , 3 second flush delay
• Set-up sensor range adjustment indicator lights
• 6 VDC input, 8 second arming delay
• Electronic operated non-hold-open metal manual override button
with 5 second lockout
• Quiet action, TECK ® exposed diaphragm flush valve
• Chloramine resistant diaphragm
• Forged brass diaphragm retainer
• Renewable seat
• Polished chrome plated finish
• External water conserving flush adjustment,
factory set at 60 PSI to 6 litre (1.6 US gal.) (except -48 and -6 models)
• 1" FIP/Copper sweat inlet adaptor, angle check stop with
protecting cap
• Adjustable 121mm (4-3/4") plus or minus 11mm (7/16") inlet/valve outlet centers
• Vacuum breaker
• Cover tube, stainless steel wall flange, spud flange, concealed spud nut,
and 292mm (11-1/2") outlet tube.
❏ 81T201BTA-6
Same as 81T201BTA,
but Not Field Adjustable
❏ 81T201BTA-48
Same as 81T201BTA, but factory set at 60 PSI to 4.8 litre
(1.27 US gal.), Not Field Adjustable
❏ 81T221BTA
Same as 81T201BTA,
but with 610 mm (24”) outlet tube
❏ 81T221BTA-6
Same as 81T221BTA, but Not Field Adjustable
❏ 81T221BTA-48
Same as 81T221BTA, but factory set at 60 PSI to 4.8 litre
(1.27 US gal.), Not Field Adjustable
❏ 81T201BTA-20
Same as 81T201BTA, but LESS stop, cover tube and
wall flange
❏ 81T201BTA-20-6
Same as 81T201BTA-20, but Not Field Adjustable
❏ 81T201BTA-20-13
Same as 81T201BTA-20, but factory set at 60 PSI to 13 litre
(3.4 US gal.)
❏ 81T201BTA-20-48
Same as 81T201BTA-20, but factory set at 60 PSI to 4.8 litre
(1.27 US gal.), Not Field Adjustable
Electronic Exposed TECK ® II
Flush Valve Retrofit Kits
Engineer/Architect Approval
Model Specified:
Approval: Date:
81T201BTA
Note: Measurements may vary ± 6mm (0.25'')
Note: For high and low pressure applications, please see page FEA-81T
High Water Pressure note for more details.
Verify flow requirements with bowl manufacturer.
Approvals:
• CSA certified
• Complies to ASSE 1037
• ADA Compliant and meets Handicapped
Accessibility Standard ASME A117.1 of
less than 5 lbs. operating force.
• IAPMO listed
(Contact Delta Representative for State
and/or Local Approvals.)
U.S. Patent # 6, 826, 455
Other Patents Pending
81T201BTA
121mm ±13mm
(4.75" ±.44")
71mm
(2.81")
76mm
(3.0")
VACUUM
BREAKER
TUBE
38mm
(1.5")
38mm (1.5")
SLIP JOINT NUT
& WASHERS
SUPPLIED
292 mm (11.5”)
for 81T201BT
610 mm (24”)
for 81T221BT
54mm
(2.13") MIN.
FINISHED WALL
TOP OF FIXTURE
INLET:
25mm (1.0")
FIP OR
COPPER
SWEAT
W/ADAPTOR
(SUPPLIED)
Refer to www.specselect.com for individual models. Note: Use this page as a product submittal sheet.
121mm
(4.76")
TECK ®
COMMERCIAL