Factory Direct Hardware Delta 81T201-WMSBT - Manual

Electronic Exposed
Teck ® Flush Valves
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.
Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability. DSP–81T201-WMSBT
❏ 81T201-WMSBT
– Exposed Battery Operated
1-1/2'' Top Inlet Closet Fixture
• Polished chrome plated vandal resistant metal cover with 4" wallmount sensor
• Right or left-hand supply installation
• ADA compliant, automatic operation battery powered
H
2
O PTICS ™ technology
infrared sensor
• Four (4) ‘C’ cell batteries
• Low battery level indicator (5000 flushes remaining)
• Infrared sensor range adjustment of 610mm-1422mm (24" - 56") in 8" increments,
factory set at 40” (±2")
• Vandal resistant copper tube conduit
• 24 hour courtesy flush factory set to off
• 6 VDC input
• Electronic manual override button
• Quiet action, Teck
® exposed diaphragm flush valve
• Chloramine resistant diaphragm
• Forged brass diaphragm retainer
• Renewable seat
• Polished chrome plated finish
• External water conserving flush adjustment, factory set at 60 PSI
to 6 litre (1.6 US gal.) (except -48 and -6 models)
• 1" FIP/Copper sweat inlet adaptor, angle check stop with protecting cap
• Adjustable 121mm (4-3/4") plus or minus 11mm (7/16") inlet/valve outlet centers
• Vacuum breaker
• Cover tube, stainless steel wall flange, spud flange, concealed spud nut, and
292mm (11-1/2") outlet tube.
❏ 81T201-6-WMSBT
Same as 81T201-WMSBT,
but Not Field Adjustable
❏ 81T201-48-WMSBT
Same as 81T201-WMSBT, but factory set
at 60 PSI to 4.8 litre (1.27 US gal.),
Not Field Adjustable
114mm
(4 1/2")
114mm
(4 1/2")
* 76mm
(3")
to top
of open
seat cover
Junction Box
51 x 102mm
(2" x 4")
Stainless Steel
Coverplate
Sensor Box
102 x 102 x 102mm
(4" x 4" x 4")
Engineer/Architect Approval
Model Specified:
Approval: Date:
81T201-WMSBT
Note: Measurements may vary ± 6mm (0.25'')
Note: For high and low pressure applications, please see page FEA-81T High Water Pressure
note for more details.
Verify flow requirements with bowl manufacturer.
Approvals:
• CSA certified
• Complies to ASSE 1037
• ADA Compliant and meets Handicapped
Accessibility Standard ASME A117.1 of
less than 5 lbs. operating force.
• IAPMO listed
(Contact Delta Representative for State
and/or Local Approvals.)
81T201-WMSBT
121mm ±13mm
(4.75" ±.44")
71mm
(2.81") VACUUM
BREAKER
TUBE
38mm
(1.5")
38mm (1.5")
SLIP JOINT NUT
& WASHERS
SUPPLIED
124mm
(4.875")
292 mm (11.5”)
54mm
(2.13") MIN.
FINISHED
WALL
TOP OF FIXTURE
INLET:
25mm (1.0")
FIP OR
COPPER
SWEAT
W/ADAPTOR
(SUPPLIED)
Refer to www.specselect.com for individual models. Note: Use this page as a product submittal sheet.
* Note:
Recommended
height to sensor
from top of
fixture is
20-22" with
24" MAX.
76mm
(3.0")
TECK ®
COMMERCIAL