Factory Direct Hardware Delta 591T0236 - Manual

Electronic Faucets
Hard Wire - 4" Lavatory - CAST one-piece body with
integral waterproof sensor and connector - (Product
supplied with a Converter to convert 24VAC to 6 VDC)
Model No: 591T0236
SPECIFICATION:
• CAST BRASS one piece body with Integral waterproof sensor and
connector
• H²Optics® technology- no external adjustments required
• Serviceable filter upstream of the solenoid valve
• Metal hold-down package
• Adjustable sensing range and timeout
• Hard Wire(24VAC) infrared electronic handwash(Product supplied with a
Converter to convert 24VAC to 6 VDC)
• Chrome Finish
• Spout#: 2 - 4" (102mm) Cast Brass Electronic Faucet
• Outlet#: 3 - Vandal Resistant Aerator Outlet- 1.5 USGPM (5.7 L/min) Flow
Rate at 60 psi- pressure compensating
• Vandal Resistant 10" x 10" Metal Box for RECESSED or SURFACE
mounting- includes MECHANICAL MIXING VALVE with Thermostatic Limit
Stop-FACTORY PLUMBED FOR EASY FIELD INSTALLATION-requires
HOT and COLD WATER supplies - with Metal Cover
COMPLIES WITH:
• For optimum performance of this product, we recommend a system
pressure between 20 and 80 PSI static. This product will operate up to a
maximum of 125 PSI static per ANSI and CSA requirements. However, we
do not recommend pressures above 80 PSI. Thermal expansion or leaking
pressure reducing valves may require use of expansion tanks or relief
valves to ensure your system never exceeds its maximum intended
pressure setting.
• CSA certified.
• Complies to ASME A112.18.1
• IAPMO listed
• ADA compliant and meets Handicapped Accessibility Standard ASME
A117.1 of less than 5 lbs. handle operating force
• U.S.Patent # 6, 826, 455
• (Contact Delta Representative for State and/or Local Approvals)
• Control Box option 6 Mechanical mixing valve CSA certified
(Dimensional drawing on following page)
• Hands free (touchless) operation
• Water flows when sensor is activated
• Water flow stops upon deactivation of sensor
• Auto shut-off feature that is selectable between 15 to 75 seconds- factory
set to 45 seconds- will reset once obstruction is removed
• Adjustable sensing distance from 76 to 381 mm (3" to 15")- factory set to
229 mm (9" plus or minus 1")
OPERATION:
NOTES:
For Additional Hi Rise Electronic Faucet models, seeElectronic - Delta HDF
Delta reserves the right (1) to make changes to specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference.
Measurement may vary plus or minus 6mm(0.25"). Mounting locations are suggested only. Check with local codes for requirements in your area. This spec was produced November 03, 2011.
- 1.0.27915
Page of 1 2
Delta Faucet Company - 55 East 111th St. - Indianapolis, Indiana, USA 46280 - (317) 848-1812
Delta Faucet Canada - 395 Matheson Blvd E - Mississauga, Ontario, Canada L4Z 2H2 - (905) 712-3030