Factory Direct Hardware Delta 83T430 - Manual

Concealed Teck ® Flush Valve
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.
Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.
DSP–83T430
Refer to www.specselect.com for individual models. Note: Use this page as a product submittal sheet.
Engineer/Architect Approval
Model Specified:
Approval: Date:
Approvals:
• CSA certified
• Complies to ASSE 1037
• Oscillating Lever Handle ADA compliant and
meets Handicapped Accessibility Standard
ASME A117.1 of less than 5 lbs. operating
force.
• IAPMO Listed
(Contact Delta Representative for State and/or
Local Approvals.)
Note: Measurements may vary ± 6mm (0.25'')
Specification: (example)
(FOR WALL HUNG, BACK INLET URINAL FIXTURE)
• Quiet action, TECK
® concealed diaphragm flush valve
• Chloramine resistant diaphragm
• Forged brass diaphragm retainer
• Renewable seat
• External water conserving flush volume adjustment,
factory set at 60 PSI to 1.9 litre (0.50 US gal.)
• Metal “non hold open” handle actuator
• Vandal resistant handle control can easily be located and
installed anywhere within 6m (20') of flush valve
• Standard flush valve will install on all walls zero to 343mm
(13-1/2'') thick
• 1'' FIP/copper sweat inlet adaptor wheel handle angle
check stop
• Adjustable 121mm (4-3/4'') plus or minus 11mm (7/16'')
inlet/valve outlet centers
• Vacuum breaker
FOR 3/4" WALL HUNG, BACK INLET
URINAL FIXTURE: (with 3/4" copper sweat adaptor)
❏ 83T430
with 16mm (5/8'') dia. push button
❏ 83T431
with oscillating handle
OPTIONS: (Add dash number to end
product required above.)
-1 Trap seal primer tee
-38 Factory set at 60 PSI to 3.8 litre (1.0 US gal),
Not Field Adjustable
-19 Factory set at 60 PSI to 1.9 litre (0.5 US gal),
Not Field Adjustable
-05 Factory set at 60 PSI to 0.5 litre (0.13 US gal),
Not Field Adjustable
Note: For high and low pressure applications,
please see page FEA-81T High Water
Pressure note for more details.
Verify flow requirements with bowl
manufacturer.
83T431
-1 OPTION TRAP SEAL PRIMER TEE
DETERGENT/DISINFECTANT
3/8" O.D. Copper Tube
(NOT SUPPLIED)
TO TRAP
SEAL
0-343mm (0-13.5")
292mm
(11.5")
102mm
(4")
121mm (4.75")
318mm (12.5")
TECK ®
COMMERCIAL