Installation – Factory Direct Hardware Hansgrohe 31063 User Manual

Page 6

Advertising
background image

6

English

Note:

To prevent shipping damage, the spout is
attached to the spout escutcheon with two
adhesive strips.

Remove the strips before installing the spout.

Installation

Remove the valve mounting nuts from the
valves.

Push the valves up into the holes. Install the
mounting nuts on the valves.

Tighten the tensioning screws.

For proper operation of the faucet, the hot
supply must be on the left, and the cold supply
must be on the right.

adhesive strips

bandes adhésives

tiras adhesivas

2.5 mm

red

rouge

rojo

Advertising