Door preparation (if needed) cont – Baldwin Stonegate Handleset User Manual
Page 7
Door Preparation (If Needed) cont.
2
6
Complete drilling holes (A,
B) from opposite side of door.
7
Very carefully drill (C, D)
holes into door edge exactly at
pencil marks.
3
1
⁄
2
" deep for a 2
3
⁄
8
" backset
3
7
⁄
8
" deep for a 2
3
⁄
4
" backset
Helpful Hint: Mark edge depth
of drilling with masking tape.
8
Very carefully drill (E)
5
⁄
16
"
hole into door exactly at pen-
cil mark.
9
Insert latch into hole (D).
Use utility knife to score chis-
el guides into door edge.
Make sure score guides are
parallel to door. Repeat for
deadbolt hole (C).
10
Chisel faceplate cavity
5
⁄
32
" deep.
Helpful Hint: Chisel toward
inside edge of score lines,
removing only a small bit to
avoid wood damage.
B
A
C
D
E
D
C
3
1
⁄
2
"
or
3
7
⁄
8
"
1"
Masking
tape
If you have any trouble installing your Baldwin product, feel free to call our toll-free consumer help line at 1-800-566-1986. Hours: 6 a.m. – midnight (east coast standard), 7 days a week.
7.