Factory Direct Hardware Delta 592-PLGHDFHW User Manual

Model no: 592-plghdfhw, Battery/hard wire lavatory faucets, Specification

Advertising
background image

Battery/Hard Wire Lavatory Faucets

Deck mount electronic Proximity™ lavatory faucet -
8" (203mm) centers – 11.1" (282mm) Forged
coverplate with anti-rotation pin - hardwire

Model No: 592-PLGHDFHW

SPECIFICATION:

Deck mount electronic lavatory faucet

All metal spout construction

Proximity™ Sensing Technology

Mixing valve required (Order separately)

Vandal resistant 0.5 gpm (1.9 L/min) flow control non-aerating spray outlet

8" (203mm) centers

11.1" (282mm) Forged coverplate with anti-rotation pin

Hardwire unit supplied with 24 VAC to 6 VDC converter (Transformer
required. Specify separately)

Chrome Finish

COMPLIES WITH:

CSA certified

Complies to ASME A112.18.1

ADA Compliant and meets Handicapped Accessibility Standard ASME
A117.1 of less than 5 lbs. handle operating force.

U.S. Patent #6, 826, 455

(Contact Delta Representative for State and/or Local Approvals)

(Dimensional drawing on following page)

Hands free (touchless) operation.

No visible sensor, the spout is the sensor.

Water flows when sensor is activated.

Water flow stops upon de-activiation of sensor.

Auto shut-off feature. Factory set to 45 seconds. Will reset and recalibrate
once obstruction is removed.

Adjustable sensing distance 0 to 89mm (0 to 3.5") factory set to 89mm
(3.5") ± 1/8".

NOTE: For optimum performance of this product, we recommend a system
pressure between 20 and 80 PSI static. This product will operate up to a
maximum of 125 PSI static per ANSI and CSA requirements. However, we
do not recommend pressures above 80 PSI. Thermal expansion or leaking
pressure reducing valves may require use of expansion tanks or relief
valves to ensure your system never exceeds its maximum intended
pressure setting.

OPERATION:

Delta reserves the right (1) to make changes to specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference.
Measurement may vary plus or minus 6mm(0.25"). Mounting locations are suggested only. Check with local codes for requirements in your area. This spec was produced November 03, 2011.

- 1.0.27915

Page of

1

2

Delta Faucet Company - 55 East 111th St. - Indianapolis, Indiana, USA 46280 - (317) 848-1812
Delta Faucet Canada - 395 Matheson Blvd E - Mississauga, Ontario, Canada L4Z 2H2 - (905) 712-3030

Advertising