Factory Direct Hardware Von Duprin 2227EOF4 - Manual

Installation Instructions
2227 Surface Vertical Rod Device
This product is covered by the following patent numbers:
3,767,238 4,167,280 4,427,223 4,466,643
1. Check hardware schedule for strikes, fasteners, and other special requirements.
2. Check carton label for trim, strikes, options, and order number.
3. Read all instructions, including instructions provided with any options used:
trim, alarm kit, glass bead kit, latch guard kit, and rod guard kit.
4. Gather special tools required: • #10-24 tap • 5/16” dia. drill bit
• #25 drill bit • 13/32” dia. drill bit
• 1/8” dia. drill bit • Hacksaw
• 1/4” dia. drill bit • 7/8” dia. hole saw
BEFORE STARTING INSTALLATION
Devices covered by these instructions:
2227 Surface Vertical Rod Device
2227-F Fire Exit Surface Vertical Rod Device
Copyright © 2000 Ingersoll-Rand Company. All rights reserved.
911334_00(7)