Factory Direct Hardware Delta RP291 Classic - Manual

COMPLIES WITH:
Indicates ADA compliance to
CABO/ANSI A117.1-1992
• ASTM F409 (RP391 Series)
BATH WASTE
DRAINS
■ Trip Lever
■ 17 Gauge Brass (RP691 Series)
■ 20 Gauge Brass (RP291)
■ Polypropylene (RP391 Series)
■ 13 1/2" (343 mm) Maximum
Vertical Adjustment
■ 7 3/4" (197 mm) Maximum
Horizontal Adjustment
Submitted Model No.: _______________________________________________
Specific Features: __________________________________________________
STANDARD SPECIFICATIONS:
•
Plated brass overflow plate.
• Gate mechanism shall be a lift and drop
gate operated by a lever mounted on the
overflow plate.
• All materials in drain line and built-in portion
of fitting shall be resistant to corrosion.
• Brass construction (RP291 and RP691 series)
or polypropylene construction (RP391 series).
• Slip joints provided in the drain and
overflow lines.
• Leakage past stopper when closed shall
not exceed one (1) U.S. gallon per hour at
a pressure of six-inch water column.
• All moveable parts must be capable of being
repaired by removing the overflow plate.
• All exposed external surfaces must be
corrosion resistant.
RP291 RP691 RP391
RP391
RP291/RP691
11"–13 1/2"
(279 mm–343 mm)
Vertical Adjustment
6"–7 3/4"
(152 mm–197 mm)
Horizontal Adjustment
2 3/8" (60 mm)
Min. Hole Size for
Overflow Plate
1 5/8" (41 mm)
Min. Hole Size for
Drain Hole
10 1/2"–13"
(267 mm–330 mm)
Vertical Adjustment
6"–7 3/4"
(152 mm–197 mm)
Horizontal Adjustment
2 3/8" (60 mm)
Min. Hole Size for
Overflow Plate
1 5/8" (41 mm)
Min. Hole Size for
Drain Hole
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only.
9.D.1