Factory Direct Hardware Toto TET6GNC Reliance - Manual

AUTOMATIC FLUSHING SYSTEM
TOTO ® , the world leader in advanced plumbing systems, provides sensor operated flush valves for facilities demanding the finest
sanitation equipment for busy restrooms. “Hands-free” technology effectively reduces unsanitary conditions from unflushed fixtures.
SELF-GENERATING POWER SYSTEM
TOTO’s ® new technology of automatic generator flush valves offer easy installation without the cost and downtime required to install
power supplies and wiring for each valve. A hydro-powered turbine charges the power supply during usage eliminating the need
for a battery replacement or consumption of external power for up to 10 years.
SUPERIOR PISTON VALVE
TOTO’s ® piston valve technology is a marked improvement over traditional rubber diaphragm type valves. Longer piston travel and
SELF-CLEANING 360° debris screen reduce common problems such as continuous running and flooding. The piston seat itself will not
warp or mis-seal thus, significantly reducing repair and maintenance costs. A micro-porous cup seal keeps the piston self-lubricated upon
each activation with the incoming water supply.
NEUTRAL ROUGH-IN
TOTO’s ® sensor flush valve has neutral rough-in, it can be used as right or left rough-in with no modification.
TET6GNC-32
To be specified:
Sensor Toilet Flush Valve
❏ Complete Set, Nickel Chrome Plated Finish
❏ TET6GNC-32 (1-1/2" V.B.) - Left and Right Rough
Complete set supplied with:
❏ Angle Stop Set - VBXCP-32
❍ 1" Angle Stop - 10077t3
❍ Spud Nut & Escutcheon - 71051Nt6
❍ Sweat Solder Kit - TH559EDVSJ3
❏ 24" Vacuum Breaker - 10075T1L
❏ Valve only, Nickel Chrome Plated Finish
❏ TET6GNC - Left and Right Rough
Z-4000-J - Adapter for Ground Joint Angle Stops
Meets the American Disabilities Act Guidelines and ANSI A117.1
requirements for people with disabilities.
TOTO’S ® ECOPOWER FLUSH VALVES™
Sensor Toilet Flush Valve, Exposed, for use with 24" Vacuum Breakers - 1.6 GPF
1
Infrared Sensor
2
Flushing
Operation Procedure For The Urinal Flush Valve
3
Flushing Every 24 Hours
The infrared sensor detects a user sitting
on the toilet seat, or standing. When the user stays in place longer than
6 seconds then moves away, the
controller sends a signal to the operating
unit to automatically trip the flush valve. If toilet is not used, the system
automatically flushes every 24 hours as
a maintenance and hygienic precaution.
OPERATING PROCEDURE A sanitary environment without using the hands.
Reliance Commercial Line
Operation Procedure For The Urinal Flush Valve
1 Infrared Sensor 2 Flushing 3 Flushing Every 24 hours
W
4
Manual Flushing Button
Use the manual flush button for
maintenance and/or emergencys.