Factory Direct Hardware Toto TEL3GTCN-60 - Manual

AUTOMATIC FAUCETS- ECOPOWER ® SYSTEM
Designed for new and retrofit installations, TOTO’s new technology of EcoPower generation sensor faucets offer easy installation without the cost and downtime required to
install power supplies and wiring for each faucet. A contemporary styled spout provides a cascading flow of water over the users’ hands, utilizing less than 0.17 gallons per cycle,
while a hydro-powered turbine charges the power supply during usage eliminating the need for battery replacement or consumption of external electrical power
for up to 10 years.
DURABLE AND SAFE
In today’s facilities, durability and safety are essential. That’s why TOTO faucets incorporate several integral features: an anti-scald thermal mixing chamber, waterproof
electronic components, vandal proof assembly, a removable strainer to prevent clogging and make cleaning easier, and no touch operation. Mounting brackets with integral
strainers and a self-cleaning solenoid valve allow for virtually uninterrupted use in high debris areas.
THERMOSTATIC MIXER
Unlike a standard mixing tee, TOTO’s true thermostatic mixing valve provides an anti-scald feature using a state of the art shape memory alloy (SMA) controller. This
mechanism reacts instantaneously to water reaching excessively high temperatures and automatically turns the water off preventing any discharge. Temperature stability is
maintained to within +/- 3˚ F regardless of pressure and temperature fluctuations in the supply lines. Check valves are integrated into the mixer to prevent cross flow of
water. The temperature of the water can also be adjusted with an external control knob.
“SMART SENSOR”
A self-adjusting sensor facilitates installation by preventing the need to make additional manual adjustments to the detection range, depending on the size of the basin the
faucet is installed upon. The faucet will also automatically shut off in cases where false detection may occur, preventing water from continuously running.
SPECIFICATION SHEET
Self-Generating EcoPower ® System
Sensor Faucet, Fordham™ Spout
OPERATING PROCEDURE
1 2 3
Water flows for as long
as you need it while your
hands are under the
faucet. After pulling your hands
away, the water turns off
immediately, saving
water.
4
By placing your hands
under the faucet, a
sensor beam path is
broken, causing the
water to turn on.
Eco
Pow
er S
yste
m
Self
Ge
nera
ting
Pow
er S
upp
ly
To be specified:
Sensor Faucet
❒ Continuous Discharge: Up to 10 secs.
❒ Single Supply - TEL3GTCN-10
❒ Thermal Mixing - TEL5GTCN-10
❒ Continuous Discharge: Up to 60 secs.
❒ Single Supply - TEL3GTCN-60
❒ Thermal Mixing - TEL5GTCN-60
Optional Accessories:
❒ 4" cc Cover Plate - TN71V100R
❒ 8" cc Cover Plate - 71244T8CC
Meets the American Disabilities Act Guidelines and ANSI A117.1
requirements for people with disabilities, and ANSI A112.18.1M as
metering / self-closing faucets.
Following the Federal mandate for water efficiency outlined in the
Environmental Protection Act of 1992, Electronic Faucets can be
rated for water consumption based on two standards: flow rate and
water consumption.
With the “Water Consumption” standard, a faucet must not use more
than 0.25 gallons of water per cycle.
The TOTO ® faucets with a 10 second cycle uses 0.17 gallons of water.
This is a 32% below the base line of 0.25 gallons per cycle.
TOTO uses water consumption because it is the most accurate method of
measuring water use. This method of measurement can be incorporated
into water usage calculations for various efficiency programs. For more
information, please consult www.totousa.com
NOTE: