QTECH SmartEdge 600 Configuration - Manual (Page 13)

Configuration and Operations
2 Configuration and Operations
This section provides information on how to configure, administer, and
troubleshoot AAA.
Note: The command syntax in the task table displays only the root command.
For the complete command syntax, see Command List.
2.1 Configuring Global AAA
To configure global attributes for AAA, perform the tasks in the following
sections.
2.1.1 Limiting the Number of Active Administrator Sessions
To limit the number of administrator sessions that can be simultaneously active
in a given context, perform the task described in Table 2.
Table 2 Number of Active Administrator Sessions
Task Root Command Notes
Limit the number of
administrator sessions
that can be simultaneously
active in a given context. aaa authentication administr
ator Enter this command in the context
configuration mode.
To set the limit, use the maximum
sessions
num-sess construct.
2.1.2 Limiting the Number of Active Subscriber Sessions
To limit the number of subscriber sessions that can be simultaneously active,
perform the task described in Table 3.
Table 3 Number of Active Subscriber Sessions
Task Root Command Notes
Limit the number of subscriber
sessions that can be simultaneously
active in a given context. aaa maximum subscriber Enter this command in the
context configuration mode.
9 61/1543-CRA 119 1170/1 Uen L | 2012-12-04