QTECH SmartEdge 600 Configuration - Manual (Page 28)

Configuring Authentication, Authorization, and Accounting
Table 28 Global L2TP Accounting
Task Root Command Notes
Configure global L2TP
accounting. aaa global accounting l2tp-
session Enter this command in global
configuration mode.
For all contexts, accounting messages
for L2TP tunnels, or sessions in L2TP
tunnels, are sent to one or more RADIUS
accounting servers with IP addresses
or hostnames configured in the local
context.
2.4.4.2 Configure Context-Specific L2TP Accounting
To configure context-specific L2TP accounting, perform the task described
in Table 29.
Table 29 Context-Specific L2TP Accounting
Task Root Command Notes
Configure context-specific L2TP
accounting. aaa accounting
l2tp Enter this command in context configuration
mode.
For the current context, accounting
messages for L2TP tunnels, or sessions
in L2TP tunnels, are sent to one or more
RADIUS accounting servers with IP
addresses or hostnames configured in the
same context.
2.4.4.3 Configure Two-Stage L2TP Accounting
Two-stage accounting collects RADIUS accounting data on both global
RADIUS accounting servers and context-specific RADIUS accounting servers.
To configure two-stage accounting for subscriber sessions, perform the tasks
in Configure Global L2TP Accounting and Configure Context-Specific L2TP
Accounting sections.
2.5 Performing Operation Tasks
To administer and troubleshoot AAA features, perform the appropriate AAA
operations tasks as shown in Table 30. Enter all the commands in exec mode.
Note: The command syntax in the task table displays only the root command.
For the complete command syntax, see Command List.
24 61/1543-CRA 119 1170/1 Uen L | 2012-12-04