QTECH SmartEdge 600 Configuration - Manual (Page 7)

Overview
• Tunnel-Server-Auth-ID (91)
• Tunnel-Function (VSA 18)
• Tx-Connect-Speed (L2TP AVP 24)
• Rx-Connect-Speed (L2TP AVP 38)
If you have IPv6 PPP subscriber sessions, the following standard RADIUS
attributes and Ericsson VSAs are supported:
• NAS-IPv6-Address (95)
• Framed-Interface-Id (96)
• Framed-IPv6-Prefix (97)
• Framed-IPv6-Route (99)
• Framed-IPv6-Pool (100)
• Delegated-IPv6-Prefix (123)
• RB-IPv6-DNS (207)
• RB-IPv6-Option (208)
• Delegated-Max-Prefix (212)
For more information about RADIUS standard attributes and vendor VSAs
provided by Ericsson AB, see RADIUS Attributes. For more information about
L2TP AVPs, see Configuring L2TP.
1.1.2.2 Maximum Subscriber Sessions
You can set a maximum limit on the number of subscriber sessions that can be
simultaneously active in a given context and for all configured contexts.
1.1.2.3 Limited Subscriber Services
You can limit the services provided to subscribers based on volume of traffic.
You can monitor volume-based services in the upstream and downstream
directions independently, separately, or aggregated in both directions.
However, you cannot simultaneously monitor aggregated traffic and either
upstream or downstream traffic.
Volume limits are imposed by the RADIUS VSA 113 in Access-Accept and
Accounting-Request messages.
AAA supports inbound and outbound traffic counters, as well as an aggregated
counter of both incoming and outgoing traffic. If the aggregated counter
exceeds the configured value for aggregated traffic limit, AAA sends a RADIUS
3 61/1543-CRA 119 1170/1 Uen L | 2012-12-04