SENA HD132x Series - Manual (Page 26)

HD132x Series User Manual
26
Note:
If there is a DHCP server in your network, and if [IP mode] is [Dynamic-IP], the DHCP server will
immediately assign a new IP address even if the IP address has been initialized. Accordingly, the TX
LED will stop blinking. Refer to Section 4.4.2 for details of [IP Mode].
(4) Re-assign the IP address
To re-assign the IP address to 192.168.1.18, edit/modify content of the IP address database with [Edit]
command of the DHCP database. Then, repeat the IP address setup procedure in 4.3.1.
Figure 4.13 [Edit] Window