SENA HD132x Series User Manual
Page 22
HD132x Series User Manual
22
shown when the MAC address is 00:01:95:04:0B:1B and the IP address 192.168.1.15.
[Default Router] is an IP address of the router that was set in [Server Setting] window.
(4) Press [Add] button to close the window.
Now, records have been added into the database.
(5) Press [DHCP Start] to start DHCP server function.
Now, the HelloDevice Utility Software operates as a DHCP server. You can see the message in
[STATUS] changing from “Monitoring” to “Listening DHCP request”. If HelloDevice Utility
gets DHCP request from a certain HelloDevice which does not exist, in DHCP DB List, it will run "DB
Setting for DHCP" window automatically. User should enter IP address and Gateway address of the
HelloDevice, and add them to DHCP DB list.
(6) Check the status of Tx LED of the HelloDevice.
If the Tx LED of the HelloDevice blinks periodically, then it means that the HelloDevice is sending a
message requesting for an IP assignment. The HelloDevice Utility Software responds to such request
of the HelloDevice. The message in [Status] displays: “DHCP ACK sent... [ 192.168. 1.15 ]”. And, if
the “DHCP ACK sent... [ 192.168. 1.15 ]” message is displayed, then it means that an IP address has
been assigned for the HelloDevice. In case that the DHCP Server has assigned the IP of HelloDevice,
then if the user clicks [DHCP Start Button] in PC having HelloDevice Utility Software which is in same
network, the message of “It was Request to other DHCP server! Packet Discarded…”
will be displayed.
(7) Confirm the HelloDevice IP address using ping.
Execute ping at the Command prompt. If set correctly, the following reply will be received:
>> ping 192.168.1.15
>> Pinging 192.168.1.15 with 32 bytes of data:
Reply from 192.168.1.15: bytes=32 time=10ms TTL=251
Reply from 192.168.1.15: bytes=32 time<10ms TTL=251
Reply from 192.168.1.15: bytes=32 time=10ms TTL=251
If you don't get the message above, repeat steps (5), (6) and (7). Because the IP address has not
been assigned correctly.
(8) Confirm the HelloDevice IP address using [IP Find].