SENA Serial_IPTM Redirector 4.3 - Manual (Page 38)

1. Select the Advanced
button in the Tactical
Software Redirector's
Control Panel window.
2. Select the Proxy Server
tab if necessary.
3. Select the checkbox
Use a Proxy Server.
4. If the proxy server
requires a login, fill in
the Username and
Password fields.
5. The Protocol Type, IP
Address, and Port
Number are required
fields. If you wish to
have the software
automatically locate the
proxy server and sense
the correct settings,
select the Auto Detect
button. If the operation
is successful, it will fill in
the settings for Protocol,
IP Address, and Port
Number.
6. Select the Test button to
use the settings to
contact the proxy server.
7. Select the OK button to
apply the settings and return to the Control Panel.
Notes
If the IP Address of Server is entered manually, a DNS name can be used.
The Auto Detect and Test operations will typically take less than 10 seconds. If either of these operations
appear to be hung, use Stop button to terminate them.
The Username and Password credentials will be transmitted to the proxy server as plaintext. A Test operation
will display an error dialog if these credentials are required by the proxy server but not yet entered.
If the proxy server requires a login, the Auto Detect and Test operations will fail if Username and Password
have not been provided.
If a proxy server is being used, related information will appear in the Trace display.