SENA Serial_IPTM Redirector 4.3 - Manual (Page 4)

2. Using the manufacturer's instructions, you configure the serial server to make its serial ports available to
the network via TCP/IP.
3. You install the Serial/IP Redirector software on each PC that will use devices attached to the serial server.
4. You configure the Serial/IP Redirector to create one or more virtual COM ports.
5. For each Serial/IP COM port, you specify the IP address of a serial server and the TCP port number that
provides access to its serial ports.
6. In your PC application, you change settings to use Serial/IP COM ports instead of local COM ports.
7. Thereafter, the PC application can use serial ports on the server instead of local serial ports.