Universal Audio Apollo Software - Manual (Page 64)

Apollo Software Manual Chapter 3: Console Application 64
Console Settings Panel
The Console panel is used to configure the global behavior of the Console application.
The Console panel within the Console Settings window
Always On Top
Normally, a UAD plug-in window can be covered by the Console Mixer window when Con-
sole is the foreground application.
When this box is checked, UAD plug-in windows always float on top of the Console Mixer
and Settings windows (when Console is the foreground application), so they can always
be seen and adjusted.
Note: This setting only affects UAD plug-in window behavior within Console; it
does not apply to UAD plug-ins when they are used in other host applications.
Clip & Peak Hold Settings
Tip: The Clip and Peak indicators can be cleared at any time with the Clear Clips
button.
Clip Hold Time
This drop menu sets the duration that the red signal clip indicators in the input, send,
and monitor meters are displayed before turning off. The available values are None, 1
second, 3 seconds (default), 5 seconds, 10 seconds, or Infinite.
Peak Hold Time
This drop menu sets the duration that the signal peak indicators in the input and send
meters are displayed before turning off. The available values are None, 1 second, 3 sec-
onds (default), 5 seconds, and 10 seconds.