Xoro HRT 7000 - Manual (Page 12)

12 HRT 7000
Engl
ish
Connection
General information
•
Assure that the device is switched off and unplugged.
•
Read the manual of your TV and attend to the safety instructions.
•
Please establish an accurate connection.
•
Please check the video output settings.
The schematic picture shows the connection of the HRT 7000 to the antenna and the TV:
1.
Connect a SCART (or CVBS) cable to the DVB-T receiver.
2. Connect the aerial cable to the aerial input (ANT IN) of the HRT 7000.
3. Connect the SCART (or CVBS) cable from the HRT 7000 to the TV set.
4. Connect the power cable and the plug to the wall outlet.
5. Switch on your DVB-T receiver and the TV
6. Choose the correct input SCART (or CVBS) at your TV
Note:
By using the loop through connector you can connect for example a second DVB-T Receiver.
Connecting to an Aerial and TV