Xoro HRT 7000 - Manual (Page 28)

28 HRT 7000
Engl
ish
Search
When you complete your modification, move the cursor to Search and press the OK button to start
the channel scan.
To cancel the scan you can press the EXIT button.
Aerial Adjustment
With this option you can control the Signal
Intensity and Signal quality of each Channel
Number.
If one channel has a too low strength, you may
adjust the aerial new and can try also to switch
on the Tuner Power.
With this option you can activate voltage at the
antenna output on or off.
LCN
With this option you can display the logical
channel numbers (LCN). Using the ◄ / ► button
to activate the option on or off.
SETUP
Installation