Set up bluetooth communication – SCANTECH ID (Champtek company) IG300BT User Manual

Page 11

Advertising
background image

11

4. Set up Bluetooth
Communication

Before the operation, Bluetooth Communication must
be set up between the scanner and cradle.

4.1 Pairing


Each scanner has to be linked or paired to a cradle
by scanning the unique Bluetooth MAC address code
located on the bottom of cradle. The pairing between
scanner and cradle is one to one that is one scanner
can be paired to a cradle only.

4.2 Set up Master Mode
Communication


Please follow the steps to set up the communication
between the scanner and cradle.
1) The scanner must scan “Scanner Master Mode”

barcode, to set the scanner in Master mode.

2) Scan the Bluetooth MAC address code located on

the bottom of the cradle.

3) When the Bluetooth MAC address code was

successfully scanned, scanner will sound 2 short
beeps with blue and red LED flash once.

4) Wait approximately five seconds, for completing

the connection process with a long beep sound.

5) If successful, Blue LED of scanner will slow flash

and the cradle will be continued on.

6) If the connections failed the scanner indicates

with 3 shot beeps and the cradle with blinking
blue LED.

Advertising