SCANTECH ID (Champtek company) IG300BT - Manual (Page 18)

18
Flashing
Flashing mode allows power up the lighting and
decoding are on (no need to activate the trigger line)
and after a period of inactivity lasting the time
specified by the trigger timeout, the scanner starts
flashing, checking for a bar code to be read.
When a bar code is detected, the lighting and
decoding automatically turn on and stay on until
another period of inactivity (timeout), after the timeout
the scanner starts flashing again.
Autostand
This mode allows you to switch from Flashing trigger
mode to Level trigger mode.
Autostand begins in flashing mode: At power up the
lighting and decoding are on (no need to activate the
trigger line) and after a period of inactivity lasting the
time specified by the trigger timeout, the scanner
starts flashing.
To switch to Level trigger mode activate the trigger
line (press the trigger).
When in Level trigger mode, after a period of
inactivity lasting the time specified by the trigger
timeout, the scanner switches back to flashing mode.
Toggle
This mode allows lighting and decoding toggle when
the trigger line is activated.
First trigger activation = lighting and decoding on,
second trigger activation = lighting and decoding off.