SCANTECH ID (Champtek company) IG300BT User Manual
Page 44
Advertising
44
7.7.2 Disable All Symbologies.
If you want to disable all Symbologies, please
scan below programming code.
Or you can scan
the “Off” option to disable individual symbologies.
Disable All Symbologies
Note: Do not reset individual parameters settings for
each symbology. When you enable a symbology,
you will recover the parameter settings stored in
memory.
Anytime, you may reset to factory defaults by
scanning the programming code of “Set factory
default” (please see 7.1.1)
Advertising