GE Industrial Solutions Micro-BDCBB - Manual (Page 23)

J85568E-1 Secondary DC Mini-Distribution Bay
Issue 6 January 2008 Safety 4 - 1
4 Safety
Please read this section carefully before installing, maintaining,
or repairing the J85568E-1 Mini-Distribution Fuse Bay.
Admonishments
Always take precautions to protect personal safety as well as the
equipment when working on power systems. Throughout this
manual, admonishments relating to personal safety are labeled
DANGER or Warning. Those relating to equipment damage
are labeled Caution. Please read all admonishments carefully
and follow safety instructions and warnings.
Safety
Statements
– For use only in restricted access areas (dedicated
equipment rooms, equipment closets, or the like) in
accordance with articles 110-16, 110-17, and 110-18
of the U.S. National Electric Code (NEC),
ANSI/NFPA No. 70, and pursuant to applicable
local codes.
– This equipment must not be installed over
combustible surfaces.
– This equipment is to be used in controlled
environments (an area where the humidity is
maintained at levels that can not cause condensation
on the equipment, the contaminating dust is
controlled, and the steady-state ambient temperature
is within the range specified).
– This equipment has been evaluated for use in a
continuous ambient temperature of up to 122°
Fahrenheit (50° Celsius).
– For installations in the United States, UL-listed
compression connectors should be used to terminate
UL-listed field-wired conductors where required.