GE Industrial Solutions Galaxy Pulsar Edge - Manual (Page 169)

Galaxy Pulsar Edge Power System Controller
Issue 3 October 2011
169
CLR=29-JUN-04,10:27:11
BEG=30-JUN-04,10:38:36
END=30-JUN-04,10:42:53
DUR=256
VAL=
0,51.08
8,50.18
18,49.24
20,48.87
248,48.36
252,49.76
254,50.84
256,51.13
.
*
The “.” line is the end-of-command identifier. The “* ” in the example above is the user
command line prompt.
GUI Report GUI Compatibility
Syntax: GUI
Description
This command is for internal use only. It reports an EasyView compatibility number. The
command response is: 841GUI=1.0
ali Special Internet Command
Syntax: ali
Description
This command is for internal use only. It exists for EasyView compatibility purposes only and
does nothing.
Error Messages
While logging into the Pulsar Edge controller or while entering commands, you may encounter
one or more of the following error messages:
Error Message Description
!-112, SYNTAX ERROR Unrecognizable command was entered.
!-220, SECURITY Super-user command was entered by someone with
user status.
!-221, EXCESSIVE LOGIN ATTEMPTS Too many attempts were made to login with an
unrecognized password.
!-223, INVALID PASSWORD New password contains an illegal character.
!-224, NEW PASSWORD MISMATCH First and second copy of new passwords don’t match
!-304, INVALID PARAMETER An attempt was made to change a parameter to an
illegal value.