Low voltage battery disconnect, Figure 12-5: low voltage battery disconnect, Contactor control switches – GE Industrial Solutions GPS 4848_100 Users Guide (dual rectifier shelf) User Manual
Page 93: Reference figures, continued
Advertising

Galaxy Power System 4848/100 with Dual Rectifier Shelf
Issue 5 September 2011
Troubleshooting Preparations 12 - 7
Reference Figures, continued
Low Voltage
Battery Disconnect
The low voltage battery disconnect (LVBD) feature consists of a
contactor, circuitry on the BJN board, and associated wiring. Control of
the contactor is dictated by the BJN contactor control board and the
controller.
Figure 12-5: Low Voltage Battery Disconnect
Contactor Control Switches
Red Light
Yellow Light
Green Light
CONTACTOR DRIVE BOARD
SW
SW
SW
BOTH SWITCHES DOWN
FORCES CONTACTOR OPEN
CONTACTOR OPEN
CONTACTOR OPEN INITIATED
DOWN FORCES
CONTACTOR CLOSED
REMOTE CONTROL ENABLED
Note: All switches should be in the
up position for normal operation.
Advertising